Difficulty
Moderate
Steps
2
Time Required
10 minutes
Sections
1
- Alternator Front Cover
- 2 steps
Flags
0
BackHonda CSC29
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Alternator Front Cover
- Remove 4, 7.9mm nuts using a 7.9mm socket driver head
- One of the nuts is placed underneath the L-Bracket. Remove the L-Bracket and the 3 circled nuts before attempting to remove the remaining nut
- There are two covers that need to be removed from the alternator. This step describes how to remove the back cover.
Remove 4, 7.9mm nuts using a 7.9mm socket driver head
One of the nuts is placed underneath the L-Bracket. Remove the L-Bracket and the 3 circled nuts before attempting to remove the remaining nut
There are two covers that need to be removed from the alternator. This step describes how to remove the back cover.
1024
Step 2
- Pull cover off the body of the alternator
- Once you have done this, you should be able to see the internal components of the alternator, particularly the bridge assembly that houses the rectifier, voltage regulator and brushes.
Pull cover off the body of the alternator
Once you have done this, you should be able to see the internal components of the alternator, particularly the bridge assembly that houses the rectifier, voltage regulator and brushes.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Chad Lagomarsino
Member since: 04/14/2016
479 Reputation
2 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 25-1, Maness Spring 2016
Member of Cal Poly, Team 25-1, Maness Spring 2016
CPSU-MANESS-S16S25G1
4 Members
10 Guides authored
