Difficulty

Very easy

Steps

4

Time Required

                          1 - 5 minutes

Sections

1

  • Keyless Remote Battery
  • 4 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • Back2016–2019 Honda Civic

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Let's get started
  • Make sure to have replacement battery ready. You will need 1 pc of CR 2032 Lithium battery.
  • Remove the metal key by sliding the switch on the back of the remote and pulling the key out.

Make sure to have replacement battery ready. You will need 1 pc of CR 2032 Lithium battery.

Remove the metal key by sliding the switch on the back of the remote and pulling the key out.

1024

Step 2

              Cracking it open
  • After removing the key, you will see 2 plastic bars. This is a place where you can split the remote open.
  • The manufacturer recommeded using a coin but any hard tool or even the key itself will work as well.
  • The manufacturer recommended using a cloth covering your coin/ tool to prevent it from denting the plastic bars.

After removing the key, you will see 2 plastic bars. This is a place where you can split the remote open.

The manufacturer recommeded using a coin but any hard tool or even the key itself will work as well.

The manufacturer recommended using a cloth covering your coin/ tool to prevent it from denting the plastic bars.

Step 3

              Removing the battery
  • Now you can gently pry it open
  • Removing the old battery from the left side.
  • Remember that the + side of the battery is facing up.

Now you can gently pry it open

Removing the old battery from the left side.

Remember that the + side of the battery is facing up.

Step 4

              Inserting a new battery
  • Inserting a new CR 2032 battery from the right side first and then press the battery down. It should make a good ‘click’ sound
  • Again, make sure the + side of the battery is facing upward.

Inserting a new CR 2032 battery from the right side first and then press the battery down. It should make a good ‘click’ sound

Again, make sure the + side of the battery is facing upward.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.

Author

                                      with 2 other contributors 


                    Anan Venasakulchai

Member since: 12/08/2018

675 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Finn Store                        

                                                  Member of Finn Store 



                    Business                     


                                            1 Member                     


                                            4 Guides authored

Philipp Glück - Jan 5, 2023

Reply

Super Anleitung mit sehr guten Fotos - vielen Dank!