Difficulty
Moderate
Steps
4
Time Required
6 - 10 minutes
Sections
2
- Front Cover
- 1 step
- Battery
- 3 steps
Flags
0
BackHonda 3000 Watt Inverter Generator EU3000IS1A
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Some images in this guide may show the lower plate removed from the generator. You do not need to remove the lower plate for this procedure.
Before you begin, make sure the generator is switched off and the generator is cool to the touch.
What you need
Step 1
Remove the front cover
- Use a 10 mm socket to remove the four capped nuts securing the front cover.
- Remove the front cover.
Use a 10 mm socket to remove the four capped nuts securing the front cover.
Remove the front cover.
1024
Step 2
Remove the battery
- Use an 8 mm socket to disconnect the battery wires from the battery terminals.
- Disconnect the black negative cable first to prevent the risk of shorting the battery.
- During reassembly, connect the black negative cable first. Make sure you reconnect the wires in the correct polarity.
Use an 8 mm socket to disconnect the battery wires from the battery terminals.
Disconnect the black negative cable first to prevent the risk of shorting the battery.
During reassembly, connect the black negative cable first. Make sure you reconnect the wires in the correct polarity.
Step 3
- Unclip the battery strap from the lower plate.
Unclip the battery strap from the lower plate.
Step 4
- Remove the battery.
Remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
Arthur Shi
Member since: 01/03/2018
211,874 Reputation
442 Guides authored
Badges:
46
+43 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,772 Guides authored
