Difficulty

Moderate

Steps

3

Time Required

                          5 - 10 minutes

Sections

2

  • Spark Plug Disconnection
  • 1 step
  • Recoil Starter Assembly
  • 2 steps

Flags

0

  • BackHonda 3000 Watt Generator EB3000CK2A

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disconnect the spark plug
  • Before you begin, disconnect the spark plug connector from the spark plug.

Before you begin, disconnect the spark plug connector from the spark plug.

1024

Step 2

              Remove the recoil starter assembly
  • Use a 10 mm socket to remove the three 12 mm-long bolts securing the recoil starter assembly.
  • Remove the recoil starter assembly.

Use a 10 mm socket to remove the three 12 mm-long bolts securing the recoil starter assembly.

Remove the recoil starter assembly.

Step 3

              Remove the recoil starter pulley
  • Use a 10 mm socket to remove the two 20 mm-long bolts securing the recoil starter pulley.
  • Remove the recoil starter pulley.

Use a 10 mm socket to remove the two 20 mm-long bolts securing the recoil starter pulley.

Remove the recoil starter pulley.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Tarun Thiruma

Member since: 11/20/2019

31,630 Reputation

                                      133 Guides authored                  



                       Badges:
                       32







                                                        +29 more badges