Difficulty

Moderate

Steps

6

Time Required

                          20 minutes

Sections

3

  • Housing
  • 3 steps
  • Circuit Board Removal
  • 1 step
  • Safety Weight
  • 2 steps

Flags

1

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackHolmes HEH8031 Space Heater

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Housing
  • Ensure the device is unplugged from the wall outlet.

Ensure the device is unplugged from the wall outlet.

1024

Step 2

  • Remove eight 12-mm Phillips #2 screws from the back cover.

Remove eight 12-mm Phillips #2 screws from the back cover.

Step 3

  • Turn heater over so the controls are facing up.
  • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.
  • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

Turn heater over so the controls are facing up.

Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

Internal wires are connected to both halves of the housing. Be careful when separating the housing.

Step 4

              Circuit Board Removal
  • Remove four 12mm Phillips #2 screws from the circuit board.

Remove four 12mm Phillips #2 screws from the circuit board.

Step 5

              Safety Weight
  • Remove wires from safety weight, as shown.
  • Pull upward on the blue connectors.
  • If connectors are tough to remove, try wiggling while pulling upward.

Remove wires from safety weight, as shown.

Pull upward on the blue connectors.

If connectors are tough to remove, try wiggling while pulling upward.

Step 6

  • Unscrew the Phillips #2 10 mm screw from the safety weight on the rear housing panel.

Unscrew the Phillips #2 10 mm screw from the safety weight on the rear housing panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Deanna Jack

Member since: 10/12/2016

333 Reputation

                                      4 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       IUPUI, Team 2-1, Baechle Fall 2016                        

                                                  Member of IUPUI, Team 2-1, Baechle Fall 2016 



                    IUPUI-BAECHLE-F16S2G1                     


                                            4 Members                     


                                            8 Guides authored