Difficulty
Easy
Steps
4
Time Required
1 minute
Sections
2
- Housing
- 3 steps
- Circuit Board Removal
- 1 step
Flags
3
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
Missed a Step
Oops! This guide is currently missing some important steps.
Better Introduction
Improve this guide by completing or revising its introduction.
BackHolmes HEH8031 Space Heater
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Housing
- Ensure the device is unplugged from the wall outlet.
Ensure the device is unplugged from the wall outlet.
1024
Step 2
- Remove eight 12-mm Phillips #2 screws from the back cover.
Remove eight 12-mm Phillips #2 screws from the back cover.
Step 3
- Turn heater over so the controls are facing up.
- Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.
- Internal wires are connected to both halves of the housing. Be careful when separating the housing.
Turn heater over so the controls are facing up.
Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.
Internal wires are connected to both halves of the housing. Be careful when separating the housing.
Step 4
Circuit Board Removal
- Remove four 12mm Phillips #2 screws from the circuit board.
Remove four 12mm Phillips #2 screws from the circuit board.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Deanna Jack
Member since: 10/12/2016
333 Reputation
4 Guides authored
Badges:
13
+10 more badges
Team
IUPUI, Team 2-1, Baechle Fall 2016
Member of IUPUI, Team 2-1, Baechle Fall 2016
IUPUI-BAECHLE-F16S2G1
4 Members
8 Guides authored
