Difficulty
Easy
Steps
11
Time Required
45 minutes
Sections
2
- Battery
- 6 steps
- Speaker
- 5 steps
Flags
0
BackHMDX Jam Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the device over so the bottom is facing up.
- Use the large plastic opening tool to gently pry the rubber base from the device.
- Slowly move the plastic opening tool around the edge of the rubber base to separate it from the plastic.
Flip the device over so the bottom is facing up.
Use the large plastic opening tool to gently pry the rubber base from the device.
Slowly move the plastic opening tool around the edge of the rubber base to separate it from the plastic.
1024
Step 2
- Use a Phillips #1 screwdriver to remove the four black 9mm screws from the device.
Use a Phillips #1 screwdriver to remove the four black 9mm screws from the device.
Step 3
- Gently separate the base from the rest of the device to reveal the battery and the main board.
Gently separate the base from the rest of the device to reveal the battery and the main board.
Step 4
- Carefully use the plastic opening tool to remove the glue around the battery and speaker connectors.
- Pull gently on the connectors to separate each one from the main board.
- The battery is connected to board in the red socket and the speaker is connected in the white socket.
Carefully use the plastic opening tool to remove the glue around the battery and speaker connectors.
Pull gently on the connectors to separate each one from the main board.
The battery is connected to board in the red socket and the speaker is connected in the white socket.
Step 5
- Batteries can be very dangerous if punctured. Use extra caution when using tools around the battery.
- Use the plastic opening tool to gently pry the battery free from the rest of the device.
Batteries can be very dangerous if punctured. Use extra caution when using tools around the battery.
Use the plastic opening tool to gently pry the battery free from the rest of the device.
Step 6
- Use new adhesive to secure battery back to the rest of the device.
Use new adhesive to secure battery back to the rest of the device.
Step 7
Speaker
- Use a Phillips #1 screwdriver to remove the four black 9mm screws from device.
Use a Phillips #1 screwdriver to remove the four black 9mm screws from device.
Step 8
- Use the plastic opening tool to pry the glue away from the wire. Be careful not to damage the wire.
Use the plastic opening tool to pry the glue away from the wire. Be careful not to damage the wire.
Step 9
- Use the plastic opening tool to separate the center plastic piece from the rest of the device.
- Gently lift the center plastic piece and feed the speaker wire through the hole.
Use the plastic opening tool to separate the center plastic piece from the rest of the device.
Gently lift the center plastic piece and feed the speaker wire through the hole.
Step 10
- Use the plastic opening tool to separate the speaker grate from the rest of the device.
Use the plastic opening tool to separate the speaker grate from the rest of the device.
Step 11
- Carefully remove the speaker through the top of the device.
- Apply new adhesive to the edge of the replacement speaker and the edge of the speaker grate to ensure they do not wiggle loose.
Carefully remove the speaker through the top of the device.
Apply new adhesive to the edge of the replacement speaker and the edge of the speaker grate to ensure they do not wiggle loose.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Maxwell Erickson
Member since: 10/22/2015
587 Reputation
4 Guides authored
Badges:
12
+9 more badges
Team
Montana Tech, Team 10-3, Shirk Fall 2015
Member of Montana Tech, Team 10-3, Shirk Fall 2015
MTUM-SHIRK-F15S10G3
4 Members
4 Guides authored
