Hkc P776A Battery Replacement Repair Guide

Difficulty

Difficult

Steps

6

Time Required

                          1 - 2 hours            

Sections

2

• Rear Case
• 2 steps
• Battery
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHKC P776A

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Separating Digitizer and Case               

• Insert the plastic opening tool between the digitizer and the case.
• Place the spudger in the gap created by the plastic opening tool to assist in separation.

Insert the plastic opening tool between the digitizer and the case.

Place the spudger in the gap created by the plastic opening tool to assist in separation.

1024

Step 2

• Slide the spudger along the perimeter of the device to fully separate the two pieces.

Slide the spudger along the perimeter of the device to fully separate the two pieces.

Step 3

              Battery               

• Insert the plastic opening tool between the battery and case.
• Apply leverage to break the glue that is attaching the battery to the case.

Insert the plastic opening tool between the battery and case.

Apply leverage to break the glue that is attaching the battery to the case.

Step 4

• Continue breaking the glue along the perimeter of the battery until the battery can be removed.
• Breaking all the glue between the battery and case may take a long time.

Continue breaking the glue along the perimeter of the battery until the battery can be removed.

Breaking all the glue between the battery and case may take a long time.

Step 5

• Using the soldering iron, heat up the solder that is attaching the battery to the motheboard.
• The heat from the soldering iron may cause personal injury or damage the internal components of the tablet.

Using the soldering iron, heat up the solder that is attaching the battery to the motheboard.

The heat from the soldering iron may cause personal injury or damage the internal components of the tablet.

Step 6

• Suck up the leftover solder using the desoldering pump.
• Remove the battery from the motherboard.

Suck up the leftover solder using the desoldering pump.

Remove the battery from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Ryan Gornati                     

Member since: 01/22/2015

409 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team 7-6, Remmell Winter 2015                        

                                                  Member of USF Tampa, Team 7-6, Remmell Winter 2015 



                    USFT-REMMELL-W15S7G6                     


                                            3 Members                     


                                            14 Guides authored