Difficulty

Moderate

Steps

7

Time Required

                          15 - 30 minutes

Sections

2

  • Top Panel
  • 5 steps
  • Speaker
  • 2 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackHitachi CP-X2010N

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before handling the speakers, ensure the device is powered off and unplugged. Also make sure that the projector has cooled off if it has recently been used, as it could become warm after prolonged use.

What you need

Step 1

              Top Panel
  • Flip the projector upside down to expose the screws on the underside.

Flip the projector upside down to expose the screws on the underside.

1024

Step 2

  • Use a Phillips #2 screwdriver to remove eight black 14 mm screws holding the top panel to the main projector body.

Use a Phillips #2 screwdriver to remove eight black 14 mm screws holding the top panel to the main projector body.

Step 3

  • Flip projector right side up and orient it so you are facing the rear panel.

Flip projector right side up and orient it so you are facing the rear panel.

Step 4

  • Use a Phillips #2 screwdriver to remove two silver 22 mm long screws.
  • Use a Phillips #2 screwdriver to remove the short silver 10 mm screw.

Use a Phillips #2 screwdriver to remove two silver 22 mm long screws.

Use a Phillips #2 screwdriver to remove the short silver 10 mm screw.

Step 5

  • Carefully lift the top panel from the body of the projector, making sure it doesn’t catch on anything.
  • Remove the panel from the body of the projector.

Carefully lift the top panel from the body of the projector, making sure it doesn’t catch on anything.

Remove the panel from the body of the projector.

Step 6

              Speaker
  • Pinch the edges of the two connectors and carefully disconnect both wires from the motherboard.

Pinch the edges of the two connectors and carefully disconnect both wires from the motherboard.

Step 7

  • Lightly grab the speakers and pull them up and towards yourself to remove the speakers from the case.
  • For reassembly, pinch the sides of the speakers together to line up middle slot first and then line up outer slots.

Lightly grab the speakers and pull them up and towards yourself to remove the speakers from the case.

For reassembly, pinch the sides of the speakers together to line up middle slot first and then line up outer slots.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Chance Kidd

Member since: 09/20/2022

1,184 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Austin Community College, Team 9-2, Watkins Fall 2022                        

                                                  Member of Austin Community College, Team 9-2, Watkins Fall 2022 



                    AUSTINCC-WATKINS-F22S9G2                     


                                            4 Members                     


                                            6 Guides authored