Difficulty

Moderate

Steps

5

Time Required

                          30 minutes - 1 hour

Sections

1

  • Motherboard
  • 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHisense Sero 8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Remove the back cover of the device using the plastic opening tool.
  • Pry open a corner of the device, then continue down the side with the tool to open the device.

Remove the back cover of the device using the plastic opening tool.

Pry open a corner of the device, then continue down the side with the tool to open the device.

1024

Step 2

  • Remove the black tape located to the left of the device.
  • Remove the clear tape directly below the camera.

Remove the black tape located to the left of the device.

Remove the clear tape directly below the camera.

Step 3

  • Remove the seven 4.43mm screws located at the top of the device using the Phillips #00 screwdriver.
  • There is no need to remove the bottom two screws holding the speakers in place.

Remove the seven 4.43mm screws located at the top of the device using the Phillips #00 screwdriver.

There is no need to remove the bottom two screws holding the speakers in place.

Step 4

  • Unlock the three ribbon cable connector latches to remove the cables.

Unlock the three ribbon cable connector latches to remove the cables.

Step 5

  • Be cautious of the extremely hot tip of the soldering iron.
  • Desolder the red, black, and yellow wires to remove the motherboard. Take a look at this guide to learn how to solder and desolder connections.
  • Desolder the black wire located on the top left of the device.
  • Once desoldered, carefully lift the motherboard out of the device.

Be cautious of the extremely hot tip of the soldering iron.

Desolder the red, black, and yellow wires to remove the motherboard. Take a look at this guide to learn how to solder and desolder connections.

Desolder the black wire located on the top left of the device.

Once desoldered, carefully lift the motherboard out of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Katharina

Member since: 02/23/2015

506 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 1-2, Leahy Winter 2015                        

                                                  Member of USF Tampa, Team 1-2, Leahy Winter 2015 



                    USFT-LEAHY-W15S1G2                     


                                            3 Members                     


                                            10 Guides authored