Difficulty

Moderate

Steps

13

Time Required

                          30 minutes

Sections

3

  • Back Panel
  • 3 steps
  • Battery
  • 3 steps
  • Hard Drive
  • 7 steps

Flags

0

  • BackHisense Chromebook C11

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Before dissembling your device, please refer to the troubleshooting guide to investigate other possible solutions to your problem.

What you need

Step 1

              Back Panel
  • Remove the front two hub caps.
  • When finished the back cover should be able to be removed.

Remove the front two hub caps.

When finished the back cover should be able to be removed.

1024

Step 2

  • Unscrew the screws with Phillips #00 screwdriver.

Unscrew the screws with Phillips #00 screwdriver.

Step 3

  • Pry the perimeter of the case with a plastic opening tool.
  • Remove the back panel.

Pry the perimeter of the case with a plastic opening tool.

Remove the back panel.

Step 4

              Battery
  • Be careful not to puncture the battery with the screwdriver or any sharp instrument.
  • Unscrew the screws with a PH000 screwdriver.

Be careful not to puncture the battery with the screwdriver or any sharp instrument.

Unscrew the screws with a PH000 screwdriver.

Step 5

  • Use tweezers to unplug the battery.

Use tweezers to unplug the battery.

Step 6

  • Remove the battery.

Remove the battery.

Step 7

              Hard Drive
  • Unscrew all of the screws that you can access on the hard drive.
  • If you cannot reach the screw beneath the black strip, move on to the next step.

Unscrew all of the screws that you can access on the hard drive.

If you cannot reach the screw beneath the black strip, move on to the next step.

Step 8

  • Remove the black strip using tweezers.

Remove the black strip using tweezers.

Step 9

  • Unscrew the screw beneath the black strip if you have not done so already.

Unscrew the screw beneath the black strip if you have not done so already.

Step 10

  • Remove the ribbon with the tweezers.

Remove the ribbon with the tweezers.

Step 11

  • Using the tweezers, carefully remove the latches attaching the silver computer chip.

Using the tweezers, carefully remove the latches attaching the silver computer chip.

Step 12

  • Continue gently removing all remaining points of attachment.

Continue gently removing all remaining points of attachment.

Step 13

  • Carefully remove the hard drive.

Carefully remove the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Chelsea Charles

Member since: 10/09/2018

418 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team S1-G3, Leahy Fall 2018                        

                                                  Member of USF Tampa, Team S1-G3, Leahy Fall 2018 



                    USFT-LEAHY-F18S1G3                     


                                            3 Members                     


                                            10 Guides authored