Hipstreet Equinox 2 Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 - 30 minutes            

Sections

2

• Rear Case
• 2 steps
• Motherboard
• 4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHipstreet Equinox 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Case               

• Remove the two 3mm screws using a PH00 screwdriver.

Remove the two 3mm screws using a PH00 screwdriver.

1024

Step 2

• Use the blue plastic opening tool to gently pry the back case off.

Use the blue plastic opening tool to gently pry the back case off.

Step 3

              Motherboard               

• Unsolder these wires from the motherboard, it is a good idea to label these wires as you remove them according to the picture to the left.

Unsolder these wires from the motherboard, it is a good idea to label these wires as you remove them according to the picture to the left.

Step 4

• Remove contact strips by lifting gently on the clip indicated in this picture, then pulling strip out of the clip.

Remove contact strips by lifting gently on the clip indicated in this picture, then pulling strip out of the clip.

Step 5

• Remove the 3.5mm screws located at these locations shown on the picture by using the PH00 screwdriver.

Remove the 3.5mm screws located at these locations shown on the picture by using the PH00 screwdriver.

Step 6

• Gently lift the motherboard out of the tablet, make sure no wires are still caught or attached while you lift the motherboard.

Gently lift the motherboard out of the tablet, make sure no wires are still caught or attached while you lift the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Brandon Snodgrass                     

Member since: 01/29/2015

410 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Clemson, Team 15-8, Shirley Winter 2015                        

                                                  Member of Clemson, Team 15-8, Shirley Winter 2015 



                    CLEM-SHIRLEY-W15S15G8                     


                                            5 Members                     


                                            12 Guides authored