Heyday Wireless Bluetooth Speaker 9979 Battery Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          7 minutes            

Sections

1

• Heyday Wireless Bluetooth Speaker 9979 Battery Replacement
• 7 steps

Flags

0

• BackHeyday Wireless Bluetooth Speaker 9979

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Heyday Wireless Bluetooth Speaker 9979 Battery Replacement               

• Remove the four bezels from the speaker’s back cover.
• Try to get under the bezel by using force, and pull it out little by little.

Remove the four bezels from the speaker’s back cover.

Try to get under the bezel by using force, and pull it out little by little.

1024

Step 2

• Use a Phillips #1 screwdriver to remove the four 1.6 mm screws. Rotate the driver counterclockwise to remove the screws.

Use a Phillips #1 screwdriver to remove the four 1.6 mm screws. Rotate the driver counterclockwise to remove the screws.

Step 3

• Remove the cover of the wireless speaker using the metal spudger. Don’t use much force to remove it.

Remove the cover of the wireless speaker using the metal spudger. Don’t use much force to remove it.

Step 4

• Once you have pulled the cover to the side, remove the two screws with a Philips #000 screwdriver. Turn counterclockwise.

Once you have pulled the cover to the side, remove the two screws with a Philips #000 screwdriver. Turn counterclockwise.

Step 5

• The battery might be glued down so use the black nylon spundger to take it out completely.

The battery might be glued down so use the black nylon spundger to take it out completely.

Step 6

• Using the nylon tipped tweezers, remove the motherboard carefully. It is recommended to grab the motherboard in the middle as there are no big buttons on it.

Using the nylon tipped tweezers, remove the motherboard carefully. It is recommended to grab the motherboard in the middle as there are no big buttons on it.

Step 7

• You want to remove the white power cable connector from the motherboard. Start by using the fixit opening pick to pull it up. Once it is almost out, use you’re fingers to just simply disconnect it.

You want to remove the white power cable connector from the motherboard. Start by using the fixit opening pick to pull it up. Once it is almost out, use you’re fingers to just simply disconnect it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Thanh Duong                     

Member since: 09/26/2022

195 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       CSU Los Angeles, Team 5-4, Adachi Fall 2022                        

                                                  Member of CSU Los Angeles, Team 5-4, Adachi Fall 2022 



                    CSULA-ADACHI-F22S5G4                     


                                            5 Members                     


                                            2 Guides authored                     

Jadealyn Paulino - Dec 12, 2022

Reply

The grammar could be improved by simplifying the steps (not using too many words or try separating into multiple bullet points) and avoiding the use of ambiguous pronouns (it).

Chris Yepez - Dec 12, 2022

Will do, thanks!

Cindy Munoz - Dec 12, 2022

Reply

There are a lot of images and some are the same.

The description of each tool needed was a very useful touch.