Difficulty
Very easy
Steps
4
Time Required
5 minutes
Sections
1
- Headlight Bulb
- 4 steps
Flags
0
Back1994 - 1999 Subaru Legacy
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Headlight Bulb
- Before you begin, make sure you have the right bulb. I got this at the local autozone.
- Do NOT touch the glass of the bulb. The oils from your fingers can drastically reduce the life of the bulb.
- Vinyl or latex gloves are great if you have them available, but not required.
Before you begin, make sure you have the right bulb. I got this at the local autozone.
Do NOT touch the glass of the bulb. The oils from your fingers can drastically reduce the life of the bulb.
Vinyl or latex gloves are great if you have them available, but not required.
1024
Step 2
- Press firmly on the plugs clip and pull to remove the power cable from the bulb.
Press firmly on the plugs clip and pull to remove the power cable from the bulb.
Step 3
- Lift up and remove the metal wire cage holding the bulb in place.
Lift up and remove the metal wire cage holding the bulb in place.
Step 4
- Remove the bulb by pulling it away from the headlight enclosure.
- Once the old bulb is removed, take your new one and place it in the headlight.
- Follow the steps in reverse to secure the new bulb in the headlight.
Remove the bulb by pulling it away from the headlight enclosure.
Once the old bulb is removed, take your new one and place it in the headlight.
Follow the steps in reverse to secure the new bulb in the headlight.
To replace the bulb, follow the steps in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Tim Asp
Member since: 01/24/2011
1,309 Reputation
6 Guides authored
Badges:
34
+31 more badges