Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
2
- Rear Panel
- 2 steps
- CPU Fan
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackHasee Z7M-i78172D1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Rear Panel
- Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
1024
Step 2
- Use a plastic opening tool to take off the back plastic panel.
Use a plastic opening tool to take off the back plastic panel.
Step 3
CPU Fan
- To take out the CPU fan it is necessary to disconnect the CPU fan cable. Use a plastic opening tool to remove the cable.
To take out the CPU fan it is necessary to disconnect the CPU fan cable. Use a plastic opening tool to remove the cable.
Step 4
- Use a #0 Phillips head screwdriver to remove the two 7mm screws holding the fan to the motherboard.
Use a #0 Phillips head screwdriver to remove the two 7mm screws holding the fan to the motherboard.
Step 5
- Lift the CPU fan out and replace with the replacement fan.
Lift the CPU fan out and replace with the replacement fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Jake Decker
Member since: 02/14/2018
311 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S6-G6, Eyestone Spring 2018
Member of USF Tampa, Team S6-G6, Eyestone Spring 2018
USFT-EYESTONE-S18S6G6
3 Members
12 Guides authored