Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

  • Harrier Tablet by EE Disassembly
  • 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackHarrier Tablet by EE

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              opening the first layer
  • Lay the tablet on a flat surface with the screen facing downward.
  • Use a guitar pick to pry up the rear most layer of the tablet, starting by the cover of the sim card.
  • Use a spudger to pry along the edges of the back layer of the tablet. Use the guitar picks to keep the edges propped open.

Lay the tablet on a flat surface with the screen facing downward.

Use a guitar pick to pry up the rear most layer of the tablet, starting by the cover of the sim card.

Use a spudger to pry along the edges of the back layer of the tablet. Use the guitar picks to keep the edges propped open.

1024

Step 2

              getting ready for the second layer
  • Before opening the second layer, use a screwdriver to remove all the screws along the edges.
  • The top left screw has an anti-tamper seal on it. Damage to this seal will void any warranties of the tablet.

Before opening the second layer, use a screwdriver to remove all the screws along the edges.

The top left screw has an anti-tamper seal on it. Damage to this seal will void any warranties of the tablet.

Step 3

              sort of disassemble entirely
  • Once the screws are removed, use a spudger and guitar picks to unclip the bezel.
  • Removing the battery and flexi rigid circuit board will likely cause damage. In order to disassemble further, you may also need to replace these parts.
  • To reassemble, first remove the sim card, then follow these instructions in reverse order.
  • Make sure the buttons are properly seated before snapping the first layer back on.

Once the screws are removed, use a spudger and guitar picks to unclip the bezel.

Removing the battery and flexi rigid circuit board will likely cause damage. In order to disassemble further, you may also need to replace these parts.

To reassemble, first remove the sim card, then follow these instructions in reverse order.

Make sure the buttons are properly seated before snapping the first layer back on.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    rarazzell

Member since: 07/07/2018

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       3