Harman Kardon Onyx Studio 2 Front Panel Replacement Repair Guide

Difficulty

Very easy

Steps

4

Time Required

                          5 - 15 minutes            

Sections

1

• Front Panel
• 4 steps

Flags

0

• BackHarman Kardon Onyx Studio 2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Panel               

• Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

1024

Step 2

• Remove the five 14.4 mm T10 Torx screws.

Remove the five 14.4 mm T10 Torx screws.

Step 3

• Gently pull the front apart from the back.

Gently pull the front apart from the back.

Step 4

• Remove the four wires connecting the front and back panels.
• Pinch the connector tab and pull gently upwards.
• Repeat for the other three connectors.

Remove the four wires connecting the front and back panels.

Pinch the connector tab and pull gently upwards.

Repeat for the other three connectors.

To reassemble, follow these steps in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Alexandra Achtenberg                     

Member since: 02/02/2017

1,873 Reputation

                                      6 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges                           

Team

                       USF Tampa, Team 16-5, Blackwell Spring 2017                        

                                                  Member of USF Tampa, Team 16-5, Blackwell Spring 2017 



                    USFT-BLACKWELL-S17S16G5                     


                                            3 Members                     


                                            24 Guides authored                     

Vaclav Matoulek - May 1, 2018

Reply

Hi, I have the ONYX STUDIO with the silver ring that serves as the stand and the handle at the same time. After removing the front grill, I find the same five holes as it is shown on your pics but there are no screws. I can just see a bottom made of plastic. Do you have experience with that? Is that just some cover I can get thru using a screwdriver and I find the screws beneath?

I want to look inside as I am facing the problem with not working battery. As soon as I unplug the power source, it stops working.