Difficulty

Easy

Steps

7

Time Required

                          10 - 20 minutes

Sections

2

  • Front Panel
  • 4 steps
  • Control Board
  • 3 steps

Flags

0

  • BackHarman Kardon Onyx Studio 2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

1024

Step 2

  • Remove the five 14.4 mm T10 Torx screws.

Remove the five 14.4 mm T10 Torx screws.

Step 3

  • Gently pull the front apart from the back.

Gently pull the front apart from the back.

Step 4

  • Remove the four wires connecting the front and back panels.
  • Pinch the connector tab and pull gently upwards.
  • Repeat for the other three connectors.

Remove the four wires connecting the front and back panels.

Pinch the connector tab and pull gently upwards.

Repeat for the other three connectors.

Step 5

              Control Board
  • Pull the silicone button band off of the outer edge of the speaker.

Pull the silicone button band off of the outer edge of the speaker.

Step 6

  • Disconnect the two pressure connections from the circuit board.

Disconnect the two pressure connections from the circuit board.

Step 7

  • Gently remove the control board band by placing fingers in contact with it through the button openings.
  • Work from the outer edges in so as not to bend the band.

Gently remove the control board band by placing fingers in contact with it through the button openings.

Work from the outer edges in so as not to bend the band.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 1 other contributor 


                    Alexandra Achtenberg

Member since: 02/02/2017

1,873 Reputation

                                      6 Guides authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       USF Tampa, Team 16-5, Blackwell Spring 2017                        

                                                  Member of USF Tampa, Team 16-5, Blackwell Spring 2017 



                    USFT-BLACKWELL-S17S16G5                     


                                            3 Members                     


                                            24 Guides authored

Zhou Yuqi - May 15, 2017

Reply

Do you guys know where to get a control board, because my board is broken so i am looking for one

Mike Champagne - Jul 4, 2017

Reply

Where to get control board onyx 2.

Frank Vitolo - Sep 17, 2017

Reply

My on/off button keeps blinking…..would somebody please email me cause I am a techno nitwit……..i’m gonna bring this piece of non chargeable crap outside and go Italian on it with the 12 gauge! SERENITY NOW!

Sincerely,

email ; jorcal3318@aol.com

rachael friesen - Jan 13, 2019

power button continually blinks. Won’t turn on, can’t pair, no other action can be taken, just the blinking power button. what’s the solution? Please share….

Paul Berrellez - Dec 13, 2017

Reply

Speaker plays for split second then fades away like wtf