Harman Kardon Invoke Power Port Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 minutes            

Sections

1

• Power Port
• 5 steps

Flags

0

• BackHarman Kardon Invoke

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Port               

• Use a metal spudger to remove the rubber base.

Use a metal spudger to remove the rubber base.

1024

Step 2

• Use a T10 Torx screwdriver to remove the four 14 mm screws.

Use a T10 Torx screwdriver to remove the four 14 mm screws.

Step 3

• Grip the bottom firmly and wiggle upwards to remove it.

Grip the bottom firmly and wiggle upwards to remove it.

Step 4

• Use a T10 Torx screwdriver to remove two 10 mm screws from the board that is attached to the ports.
• Pull the board up lightly.

Use a T10 Torx screwdriver to remove two 10 mm screws from the board that is attached to the ports.

Pull the board up lightly.

Step 5

• Pull the cable to disconnect the board from the device.
• To replacement the service port, you will have to replace the whole board that the port is attached to.

Pull the cable to disconnect the board from the device.

To replacement the service port, you will have to replace the whole board that the port is attached to.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 7 other contributors 

                    Angel A. Grageda                     

Member since: 10/02/2018

686 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Eastern Washington University, Team S2-G2, Munoz Fall 2018                        

                                                  Member of Eastern Washington University, Team S2-G2, Munoz Fall 2018 



                    EWU-MUNOZ-F18S2G2                     


                                            3 Members                     


                                            5 Guides authored                     

crokeclan - Apr 26, 2019

Reply

can I buy that power port circuit board from HK direct?