Harman Kardon Esquire Mini External Stand Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          3 minutes

Sections

Front Panel
2 steps
External Stand
1 step

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackHarman Kardon Esquire Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Panel

Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.
Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.

Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

1024

Step 2

Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.
Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.
After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.

Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.

After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Step 3

              External Stand

Using the Pentalobe screw driver, unscrew the 5.1 mm screws by applying a clockwise force.
Remove all of the 5.1 mm screws, and slowly lift the stand. There are 4 screws on the stand.
After the stand is removed, replace the stand with a new one.

Using the Pentalobe screw driver, unscrew the 5.1 mm screws by applying a clockwise force.

Remove all of the 5.1 mm screws, and slowly lift the stand. There are 4 screws on the stand.

After the stand is removed, replace the stand with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    yousef aljeemaz

Member since: 10/18/2017

928 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S1-G9, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G9, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G9                     


                                            5 Members                     


                                            5 Guides authored

Incorrect Tools#

Introduction#

What you need#

#

#

#

#

#

Team#

#

Incorrect Tools

Introduction

What you need

Team