Harman Kardon Esquire Mini Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          7 minutes

Sections

Front Panel
2 steps
Battery
2 steps

Flags

BackHarman Kardon Esquire Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Panel

Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.
Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

Using the plastic opening tool, to open the back panel of the device. Start on the longer sides to avoid bending the metal frame at the plug ports.

Push down on the plastic opening tool, and push the back panel, repeat this for the 4 sides of the device.

1024

Step 2

Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.
Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.
After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Using the PH0 screw driver, remove the 7.5 mm screws by turning in a counter-clockwise direction. There are 6 screws on the front panel.

Remove all of the 7.5 mm screws, by repeating the same step above. It is not necessary to remove the stand-leg.

After unscrewing the 7.5 mm screws, just lift the plastic and you will see the motherboard.

Step 3

              Battery

After removing the front panel, remove the battery from its plug using a small amount of force.
Do not to break the battery plug, be gentle.

After removing the front panel, remove the battery from its plug using a small amount of force.

Do not to break the battery plug, be gentle.

Step 4

Remove the battery by using a plastic opening tool, by applying an upward force.
Be careful to not tear the electric wires.

Remove the battery by using a plastic opening tool, by applying an upward force.

Be careful to not tear the electric wires.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 1 other contributor

                    yousef aljeemaz

Member since: 10/18/2017

928 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S1-G9, Cagle Fall 2017                        

                                                  Member of USF Tampa, Team S1-G9, Cagle Fall 2017 



                    USFT-CAGLE-F17S1G9                     


                                            5 Members                     


                                            5 Guides authored

Antony Cartwright - Mar 30, 2019

Between steps 3 and 4 I needed to disconnect the red speaker cable (right speaker step 4 image). I can see you didn’t need to. The cable came out and returned to a socket.

Dennis Easter - Jun 29, 2019

Where do I get a new battery?

anonymuchacho - Dec 10, 2022

I was able to follow this guide to disassemble my Harman/Kardon Esquire 2 speaker to also replace the battery, which had dropped to only holding about 20m charge.

Process is almost identical, just a bigger unit/speaker.The battery in this unit was a “GSP805070” 3.7V 3200mAh, 11.84Wh Lithium Polymer, this had swollen to nearly double its thickness.I was able to find a 3500mAh replacement on eBay.

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team