Difficulty

Moderate

Steps

3

Time Required

                          5 - 20 minutes            

Sections

1

  • Hard Drive Seagate External HDD change
  • 3 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackWestern Digital

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Open housing               
  • It is best to open the case at the rear of the connectors.
  • The lid has lugs (1) made of plastick which are hardened in the bottom pan (2). By pressing the bottom pan to the outside they can be solved. Best with a flat screwdriver or similar tool.
  • The manufacturer does not seem to have intended the opening, so some shrinkage at the entanglement can not be excluded. (3)

It is best to open the case at the rear of the connectors.

The lid has lugs (1) made of plastick which are hardened in the bottom pan (2). By pressing the bottom pan to the outside they can be solved. Best with a flat screwdriver or similar tool.

The manufacturer does not seem to have intended the opening, so some shrinkage at the entanglement can not be excluded. (3)

1024

Step 2

              Lift out hard disk carriage               
  • The Fetplatte can now be lifted out of the plastic housing. It is not attached any further.

The Fetplatte can now be lifted out of the plastic housing. It is not attached any further.

Step 3

              Remove the hard disk from the hard disk carriages               
  • Unscrew the side screws.
  • Remove permanently attached cables and stickers from the grease plate.
  • Then pull the hard drive backwards with a little force.

Unscrew the side screws.

Remove permanently attached cables and stickers from the grease plate.

Then pull the hard drive backwards with a little force.

Repeat the steps in order to reassemble your device.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             


        irlanda is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

irlanda

Author

                                      with 1 other contributor 

                    Nicola                     

Member since: 03/29/2016

61 Reputation

                                      1 Guide authored                  



                       Badges:
                       3