Difficulty
Easy
Steps
4
Time Required
5 minutes
Sections
1
- Hard Drive
- 4 steps
Flags
0
BackGateway LT2104u
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Use a Phillips #0 screwdriver to loosen the screws.
- The screws are designed to remain in the panel.
Use a Phillips #0 screwdriver to loosen the screws.
The screws are designed to remain in the panel.
1024
Step 2
- To open the panel, use a plastic opening tool or your finger.
- If there is difficulty opening the panel, than the screws may not be lose enough.
To open the panel, use a plastic opening tool or your finger.
If there is difficulty opening the panel, than the screws may not be lose enough.
Step 3
- Use the Phillips #0 screwdriver to unscrew the two 5mm screws.
- Remove the hard drive by using your fingers to pull firmly on the clear tab.
Use the Phillips #0 screwdriver to unscrew the two 5mm screws.
Remove the hard drive by using your fingers to pull firmly on the clear tab.
Step 4
- You have successfully removed the hard drive from the laptop.
You have successfully removed the hard drive from the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Steven Park
Member since: 03/09/2016
396 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team 7-5, Catania Spring 2016
Member of UMass Dartmouth, Team 7-5, Catania Spring 2016
UMASSD-CATANIA-S16S7G5
3 Members
10 Guides authored
