Difficulty

Easy

Steps

8

Time Required

                          8 minutes

Sections

3

  • Battery
  • 3 steps
  • Hard Drive Access Door
  • 2 steps
  • Hard Drive
  • 3 steps

Flags

0

  • BackHannspree SN12E2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Unplug and power off your laptop.

Unplug and power off your laptop.

1024

Step 2

  • Close your laptop .
  • Place your laptop face down on a flat surface.

Close your laptop .

Place your laptop face down on a flat surface.

Step 3

  • Unlatch the lock on the top right of your laptop first.
  • You will need to pull on the lock on the left side and remove the battery at the same time
  • The left lock is a spring lock and needs constant pressure applied in order to stay open.

Unlatch the lock on the top right of your laptop first.

You will need to pull on the lock on the left side and remove the battery at the same time

The left lock is a spring lock and needs constant pressure applied in order to stay open.

Step 4

              Hard Drive Access Door
  • Remove the three 3mm Phillips #0 screws.

Remove the three 3mm Phillips #0 screws.

Step 5

  • Gently pull on the access panel to remove it.

Gently pull on the access panel to remove it.

Step 6

              Hard Drive
  • Remove the four 4mm Phillips #0 retaining screws.
  • The hard drive caddy is the large piece of metal with black circles.

Remove the four 4mm Phillips #0 retaining screws.

The hard drive caddy is the large piece of metal with black circles.

Step 7

  • Next, lift up the hard drive and pull towards you. Lift up the end of the hard drive that is not plugged into the computer.

Next, lift up the hard drive and pull towards you. Lift up the end of the hard drive that is not plugged into the computer.

Step 8

  • Slide your hard drive out of the metal piece by unscrewing the sides.

Slide your hard drive out of the metal piece by unscrewing the sides.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kyle Duby

Member since: 03/26/2019

181 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S2-G2, Simcock Spring 2019                        

                                                  Member of UMass Dartmouth, Team S2-G2, Simcock Spring 2019 



                    UMASSD-SIMCOCK-S19S2G2                     


                                            4 Members                     


                                            9 Guides authored