Hamilton T1 Oxygen Cells Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          10 minutes            

Sections

1

• Oxygen Cells
• 4 steps

Flags

0

• BackHamilton-T1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

NOTE:

• Replace the oxygen cell with genuine Hamilton Medical parts only; otherwise, oxygen measurement will not function. To prevent a permanent alarm make sure to use special Hamilton Medical oxygen cells only.To prevent leakage within the ventilator, make sure an oxygen cell is installed at all times, even if you use an external monitor or disable oxygen monitoring.

What you need

Step 1

              Oxygen Cells               

• Flip device around until the back panel is exposed.

Flip device around until the back panel is exposed.

1024

Step 2

• Remove the screw in the bottom center of the panel, and then take the panel off.

Remove the screw in the bottom center of the panel, and then take the panel off.

Step 3

• Disconnect the oxygen cell by removing the tube.
• Then twist the cell counter-clockwise and pull to remove the oxygen cell.
• Install the new oxygen cell and put the back cover on.

Disconnect the oxygen cell by removing the tube.

Then twist the cell counter-clockwise and pull to remove the oxygen cell.

Install the new oxygen cell and put the back cover on.

Step 4

• After the cell is installed. Run the oxygen cell calibration.
• Oxygen calibration guide can be found in 3-11 of the Hamilton-T1 operations manual.

After the cell is installed. Run the oxygen cell calibration.

Oxygen calibration guide can be found in 3-11 of the Hamilton-T1 operations manual.

After the installation and calibration of the oxygen cell. The Hamilton-T1 Ventilator is ready to operate.

Cancel: I did not complete this guide.

Attached Documents

• HAMILTON-T1 Operator’s Manual SW2.1x EN
• PDF - 4.17 mb
• View

HAMILTON-T1 Operator’s Manual SW2.1x EN

PDF - 4.17 mb

Author

                                      with 1 other contributor 

                    Tyler                     

Member since: 04/09/2020

114 Reputation

                                      1 Guide authored                  



                       Badges:
                       4





                                                        +1 more badge                           

Team

                       Cal Poly, Team S11-G24, Paton Spring 2020                        

                                                  Member of Cal Poly, Team S11-G24, Paton Spring 2020 



                    CPSU-PATON-S20S11G24                     


                                            3 Members                     


                                            3 Guides authored