Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackHamilton-T1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Battery
- Use the handle on the left side of the front panel to pull the cover off.
Use the handle on the left side of the front panel to pull the cover off.
1024
Step 2
- Locate the metal lock clip above the battery on the left-hand side.
- Turn the metal lock clip to the left and all the way up.
- This will allow access to the battery.
Locate the metal lock clip above the battery on the left-hand side.
Turn the metal lock clip to the left and all the way up.
This will allow access to the battery.
Step 3
- Pull the white tab on the end of the battery to pull it out of the slot.
Pull the white tab on the end of the battery to pull it out of the slot.
Step 4
- Insert the replacement battery by holding onto the white tab and sliding it into the empty slot.
- The Hamilton Medical logo needs to be facing up.
Insert the replacement battery by holding onto the white tab and sliding it into the empty slot.
The Hamilton Medical logo needs to be facing up.
Step 5
- Turn the metal locking clip down and to the right, until it forms a straight line.
Turn the metal locking clip down and to the right, until it forms a straight line.
Step 6
- Close the cover.
Close the cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Amanda Olla
Member since: 04/07/2020
255 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Cal Poly, Team S11-G24, Paton Spring 2020
Member of Cal Poly, Team S11-G24, Paton Spring 2020
CPSU-PATON-S20S11G24
3 Members
3 Guides authored