Difficulty

Easy

Steps

12

Time Required

                          10 minutes

Sections

3

  • Rail
  • 4 steps
  • Main Cover
  • 2 steps
  • Ventilation Unit Motherboard
  • 6 steps

Flags

0

  • BackHamilton G5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rail
  • Remove 4 Hex Allen screws (A) from the Rail surrounding the Ventilation Unit.

Remove 4 Hex Allen screws (A) from the Rail surrounding the Ventilation Unit.

1024

Step 2

  • Remove the Rail (B).

Remove the Rail (B).

Step 3

  • The Standoff Brackets (C) remain with the Main Cover.

The Standoff Brackets (C) remain with the Main Cover.

Step 4

  • Place aside in a safe location.

Place aside in a safe location.

Step 5

              Main Cover
  • Lift the Main Cover (A) from the Ventilation Unit using the Standoff Brackets (B) attached to the Main Cover.

Lift the Main Cover (A) from the Ventilation Unit using the Standoff Brackets (B) attached to the Main Cover.

Step 6

Step 7

              Ventilation Unit Motherboard
  • First, we need to remove the ESM module. It is connected to 2 connector sockets. Disconnect and remove.

First, we need to remove the ESM module. It is connected to 2 connector sockets. Disconnect and remove.

Step 8

  • Take out the Ventilation Real-time Controller (VRC) SW chip

Take out the Ventilation Real-time Controller (VRC) SW chip

Step 9

  • Install the ESM Module, by connecting the connectors (A), and the VRC SW chip on the new board.

Install the ESM Module, by connecting the connectors (A), and the VRC SW chip on the new board.

Step 10

  • Disconnect all cables and connections from the board to the unit.

Disconnect all cables and connections from the board to the unit.

Step 11

  • Remove the three Hex screws (B).

Remove the three Hex screws (B).

Step 12

  • Move the motherboard out then up away from the ventilation unit (C).

Move the motherboard out then up away from the ventilation unit (C).

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Dane Dormedy

Member since: 04/08/2020

349 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       Cal Poly, Team S7-G25, Paton Spring 2020                        

                                                  Member of Cal Poly, Team S7-G25, Paton Spring 2020 



                    CPSU-PATON-S20S7G25                     


                                            6 Members                     


                                            11 Guides authored