Difficulty

Moderate

Steps

9

Time Required

                          10 - 20 minutes

Sections

3

  • Rail
  • 4 steps
  • Main Cover
  • 2 steps
  • Nebulizer Valve
  • 3 steps

Flags

0

  • BackHamilton G5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

For more information on replacing the nebulizer, please refer to section 10 in the service manual.

What you need

Step 1

              Rail
  • Remove 4 Hex Allen screws (A) from the Rail surrounding the Ventilation Unit.

Remove 4 Hex Allen screws (A) from the Rail surrounding the Ventilation Unit.

1024

Step 2

  • Remove the Rail (B).

Remove the Rail (B).

Step 3

  • The Standoff Brackets (C) remain with the Main Cover.

The Standoff Brackets (C) remain with the Main Cover.

Step 4

  • Place aside in a safe location.

Place aside in a safe location.

Step 5

              Main Cover
  • Lift the Main Cover (A) from the Ventilation Unit using the Standoff Brackets (B) attached to the Main Cover.

Lift the Main Cover (A) from the Ventilation Unit using the Standoff Brackets (B) attached to the Main Cover.

Step 6

Step 7

              Nebulizer Valve
  • After the rail and main cover are taken off, remove the dark blue tubing connected to the nebulizer, pictured here.

After the rail and main cover are taken off, remove the dark blue tubing connected to the nebulizer, pictured here.

Step 8

  • Remove the two phillips screws labeled A from the Nebulizer valve.

Remove the two phillips screws labeled A from the Nebulizer valve.

Step 9

  • Remove the nebulizer valve parts.
  • The Nebulizer Valve parts are:B. Straight fitting
  • C. Front Nozzle fitting
  • D. Elbow fitting
  • E. Mounting bracket
  • F. Hex Allen screw for attaching the bracket to the Safety Valve Block

Remove the nebulizer valve parts.

The Nebulizer Valve parts are:B. Straight fitting

C. Front Nozzle fitting

D. Elbow fitting

E. Mounting bracket

F. Hex Allen screw for attaching the bracket to the Safety Valve Block

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Cole Korchek

Member since: 04/08/2020

133 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Cal Poly, Team S7-G25, Paton Spring 2020                        

                                                  Member of Cal Poly, Team S7-G25, Paton Spring 2020 



                    CPSU-PATON-S20S7G25                     


                                            6 Members                     


                                            11 Guides authored