Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Battery
- 3 steps
Flags
0
BackHAMILTON C-1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
A battery in the HAMILTON-C1 acts as a backup for the main power source which is through an outlet in the wall. Battery power is used to protect the HAMILTON-C1 from low power or power failures. If you notice that the battery percentage is not fully charged, consider connecting the HAMILTON-C1 to the primary power source to recharge the battery. However if the battery cannot keep its charge, replace the battery. It is crucial to have a full battery to ensure the safety of the patient.
Make sure to disconnect the device from any power source before beginning.
What you need
Step 1
Battery
- Orient the Hamilton-C1 monitor so the front view is facing you.
- Pry open the battery cover flap located at number 10 of the graphic.
Orient the Hamilton-C1 monitor so the front view is facing you.
Pry open the battery cover flap located at number 10 of the graphic.
1024
Step 2
- Fully insert the battery into the slot.
Fully insert the battery into the slot.
Step 3
- Use your Flathead 4 mm Screwdriver to attach the battery cover with two captive screws.
Use your Flathead 4 mm Screwdriver to attach the battery cover with two captive screws.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Tina Vo
Member since: 04/06/2020
538 Reputation
4 Guides authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S7-G11, Paton Spring 2020
Member of Cal Poly, Team S7-G11, Paton Spring 2020
CPSU-PATON-S20S7G11
2 Members
6 Guides authored