Difficulty
Difficult
Steps
5
Time Required
                          20 - 30 minutes            
Sections
1
- Motor
- 5 steps
Flags
0
- BackHamilton Beach 64650 
- Full Screen 
- Options 
- History 
- Save to Favorites 
- Download PDF 
- Edit 
- Translate 
- Get Shareable Link 
- Embed This Guide 
- Notify Me of Changes 
- Stop Notifications 
Introduction
What you need
Step 1
              Motor               
- Flip the handle on its side. Remove five 3.8 mm Philips #2 screws shown and set aside them aside.
Flip the handle on its side. Remove five 3.8 mm Philips #2 screws shown and set aside them aside.
1024
Step 2
- Remove the four 8.6 mm Philips #2 screws securing the motor mount and place them aside.
Remove the four 8.6 mm Philips #2 screws securing the motor mount and place them aside.
Step 3
- Carefully pull the motor block out of the case.
- Collect the two spring located on top of the white beater gears. The springs are held in place with compression, and may fall into the case when the motor is moved.
- Handle the wires with care to ensure you do not break any of them.
Carefully pull the motor block out of the case.
Collect the two spring located on top of the white beater gears. The springs are held in place with compression, and may fall into the case when the motor is moved.
Handle the wires with care to ensure you do not break any of them.
Step 4
- Desolder the six wires connected to the motor using this guide.
- Make sure to note colors when you disconnect them and remember where to reconnect them later.
Desolder the six wires connected to the motor using this guide.
Make sure to note colors when you disconnect them and remember where to reconnect them later.
Step 5
- Once disconnected, the motor will slide out easily.
Once disconnected, the motor will slide out easily.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
                                      with 3 other contributors 
                    Gwen Davis                     
Member since: 03/24/2016
519 Reputation
                                      5 Guides authored                  
                       Badges:
                       6
                                                        +3 more badges                           
Team
                       UMass Dartmouth, Team 7-3, Catania Spring 2016                        
                                                  Member of UMass Dartmouth, Team 7-3, Catania Spring 2016 
                    UMASSD-CATANIA-S16S7G3                     
                                            3 Members                     
                                            5 Guides authored