Hamilton Beach 48464 Heating Plate Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Heating Plate
7 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

BackHamilton Beach 48464
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Heating Plate

To begin, carefully open the top lid of the Brew Station.

To begin, carefully open the top lid of the Brew Station.

1024

Step 2

Gently pull out the filter basket from the Brew Station and set it to the side.

Gently pull out the filter basket from the Brew Station and set it to the side.

Step 3

Grab the handle and pull up to remove the top container.
Set this piece close by as you will be needing it for a future step.

Grab the handle and pull up to remove the top container.

Set this piece close by as you will be needing it for a future step.

Step 4

Using the Crown Bolt #8 Steel Spanner, unscrew the four 8-mm screws labeled in a red outline.

Using the Crown Bolt #8 Steel Spanner, unscrew the four 8-mm screws labeled in a red outline.

Step 5

Check again to make sure that the coffee maker is not plugged in.
Once the screws are removed, carefully pull off the metal piece.
Once the piece is removed, you will be able to access the heater.

Check again to make sure that the coffee maker is not plugged in.

Once the screws are removed, carefully pull off the metal piece.

Once the piece is removed, you will be able to access the heater.

Step 6

This step involves using the top contained that you put aside in step 3.
Using the Philips 2 Screwdriver, unscrew the eight 8-mm screws labeled in a red outline.

This step involves using the top contained that you put aside in step 3.

Using the Philips 2 Screwdriver, unscrew the eight 8-mm screws labeled in a red outline.

Step 7

Once screws are removed, carefully pull out the metal piece from the unit. This is the top part of the heater in the Brew Staton.
There are rubber washers inside each of the 8 holes on the piece of metal. Be careful to not let any fall out when handling the piece.

Once screws are removed, carefully pull out the metal piece from the unit. This is the top part of the heater in the Brew Staton.

There are rubber washers inside each of the 8 holes on the piece of metal. Be careful to not let any fall out when handling the piece.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Michael Damico

Member since: 02/10/2016

637 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 14-1, Lacy Spring 2016                        

                                                  Member of USF Tampa, Team 14-1, Lacy Spring 2016 



                    USFT-LACY-S16S14G1                     


                                            4 Members                     


                                            6 Guides authored

Missing Details#

Introduction#

What you need#

Team#

Missing Details

Introduction

What you need

Team