Difficulty
Moderate
Steps
1
Time Required
Suggest a time??
Sections
- H. Preflight Checklist-Sensors
- 1 step
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackBLV MGN Cube
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
This guide is still a work in progress. Pictures and additional info will be added over the coming weeks
Step 1
Sensors
- Hotend and bed sensor should be reading around room temperature
- If either sensor shows a “-###c”(negative temperature) double check your your connections. It’s common to show this if you don’t have a good connection.
- Vin is your PSU input voltage
- V12 is the Duets on board 12v regulator
- MCU temperature is the Duets processor temperature
Hotend and bed sensor should be reading around room temperature
If either sensor shows a “-###c”(negative temperature) double check your your connections. It’s common to show this if you don’t have a good connection.
Vin is your PSU input voltage
V12 is the Duets on board 12v regulator
MCU temperature is the Duets processor temperature
1024
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
David Husolo
Member since: 06/16/2021
7,245 Reputation
28 Guides authored
Badges:
14
+11 more badges