Difficulty

Moderate

Steps

6

Time Required

                          20 minutes

Sections

1

  • Silicon Pad Replacement
  • 6 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackGame Console

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

However, I was so absorbed in it that the controller got messed up.

At this rate, you will not be able to perform any tricks or reload!

Replace the silicone pad immediately

What you need

Step 1

              Remove the screw of the case
  • Remove the case screws

Remove the case screws

1024

Step 2

              Remove case
  • There is a small space beside the keyboard, insert the pick and remove the claw
  • As you open the device, you can see that the flexible cable and the battery cable are connected. Then unplug the connector.

There is a small space beside the keyboard, insert the pick and remove the claw

As you open the device, you can see that the flexible cable and the battery cable are connected. Then unplug the connector.

Step 3

              Remove screws on the logic board
  • Remove screws on the logic board.
  • Because some black threads are mixed, do not forget to remove

Remove screws on the logic board.

Because some black threads are mixed, do not forget to remove

Step 4

              Remove the wifi connector on the logic board
  • Remove Wi-Fi antenna cable and LCD connector

Remove Wi-Fi antenna cable and LCD connector

Step 5

              Remove the joystick
  • Remove the screws of the joystick and remove the flex cable from the connector.
  • Then, it is ready to pull logic board out of the case.

Remove the screws of the joystick and remove the flex cable from the connector.

Then, it is ready to pull logic board out of the case.

Step 6

              Replace the silicone pad
  • You can access the silicone pad by removing the logic board.
  • Replace a sticky silicon pad

You can access the silicone pad by removing the logic board.

Replace a sticky silicon pad

To reassemble your device, please follow these steps in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

@HectorNavarroMX

Midori Doi

Choojoo

Author

                                      with 2 other contributors 


                    noria901

Member since: 06/15/2018

482 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge