Governor Adjustment Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 - 20 minutes            

Sections

1

• Governor Adjustment
• 3 steps

Flags

0

• Back4-Stroke Small Gas Engine

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Governor Adjustment               

• Before starting, make sure the engine isn’t running and is not hot.
• Using needle-nose pliers, carefully unhook the spring from the end opposite the air filter.

Before starting, make sure the engine isn’t running and is not hot.

Using needle-nose pliers, carefully unhook the spring from the end opposite the air filter.

1024

Step 2

• Use the needle-nose pliers to either lengthen or shorten the hook at the end of the spring.
• If your engine is stalling or refusing to start, try shortening the spring. This will enable more fuel to reach to engine at idle. If the engine is bogged down when running and you hear liquids splashing, try lengthening the spring.

Use the needle-nose pliers to either lengthen or shorten the hook at the end of the spring.

If your engine is stalling or refusing to start, try shortening the spring. This will enable more fuel to reach to engine at idle. If the engine is bogged down when running and you hear liquids splashing, try lengthening the spring.

Step 3

• Carefully re-hook the spring on the arm it was disconnected from.

Carefully re-hook the spring on the arm it was disconnected from.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Aaron Correya                     

Member since: 04/19/2018

239 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team S25-G15, Maness Spring 2018                        

                                                  Member of Cal Poly, Team S25-G15, Maness Spring 2018 



                    CPSU-MANESS-S18S25G15                     


                                            4 Members                     


                                            7 Guides authored