Difficulty

Moderate

Steps

13

Time Required

                          5 - 20 minutes

Sections

2

  • Battery (Back Panel)
  • 7 steps
  • Right Charging Port
  • 6 steps

Flags

0

  • BackGoogle Pixelbook

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery (Back Panel)
  • Use the iFixit opening tools or a metal spudger to pry the rubber covers off the back of your Pixelbook.
  • Peel the linings off completely until the back of the Pixelbook looks bare.

Use the iFixit opening tools or a metal spudger to pry the rubber covers off the back of your Pixelbook.

Peel the linings off completely until the back of the Pixelbook looks bare.

1024

Step 2

  • Remove the two yellow 2.0mm screws by using a T3 Torx screwdriver.

Remove the two yellow 2.0mm screws by using a T3 Torx screwdriver.

Step 3

  • Remove the seventeen 3.0mm T5 Torx screws from the bottom panel.

Remove the seventeen 3.0mm T5 Torx screws from the bottom panel.

Step 4

  • Use the nylon spudger to pry the edge of the Pixelbook up until you can grab the edge with your fingers.
  • Open the back panel completely and lay it flat so you see the whole inside of the computer.

Use the nylon spudger to pry the edge of the Pixelbook up until you can grab the edge with your fingers.

Open the back panel completely and lay it flat so you see the whole inside of the computer.

Step 5

  • Remove the yellow 2.0mm screw from the middle of the panel by using the T3 Torx screwdriver to turn the screw counterclockwise.

Remove the yellow 2.0mm screw from the middle of the panel by using the T3 Torx screwdriver to turn the screw counterclockwise.

Step 6

  • Remove the small, black casing by using the spudger to lift it up from its place.

Remove the small, black casing by using the spudger to lift it up from its place.

Step 7

  • Disconnect the flat, black cord from the main component by using a spudger to push it out of the slot, or by using your hand to carefully pull it out.
  • Your back panel is now free from the main component.

Disconnect the flat, black cord from the main component by using a spudger to push it out of the slot, or by using your hand to carefully pull it out.

Your back panel is now free from the main component.

Step 8

              Right Charging Port
  • Remove the three 2.0mm black screws from the sound card by using a T5 Torx screwdriver to turn them counterclockwise.
  • Remove the gold 3.0mm screw by using a T3 Torx screwdriver to turn it counterclockwise.

Remove the three 2.0mm black screws from the sound card by using a T5 Torx screwdriver to turn them counterclockwise.

Remove the gold 3.0mm screw by using a T3 Torx screwdriver to turn it counterclockwise.

Step 9

  • Disconect the thin, black and red cord from the motherboard by using the spudger to snap the connector up and out of place.

Disconect the thin, black and red cord from the motherboard by using the spudger to snap the connector up and out of place.

Step 10

  • Remove the yellow 2.0mm screw by using the T3 Torx screwdriver to turn the screw counterclockwise.

Remove the yellow 2.0mm screw by using the T3 Torx screwdriver to turn the screw counterclockwise.

Step 11

  • Remove the small, red component by lifting it up with the spudger.

Remove the small, red component by lifting it up with the spudger.

Step 12

  • Disconnect the metal component of the thin, black component by lifting it up with the spudger.

Disconnect the metal component of the thin, black component by lifting it up with the spudger.

Step 13

  • Remove the right charging port by picking it up with the tweezers and lifting it from the computer.

Remove the right charging port by picking it up with the tweezers and lifting it from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Alon Gary

Member since: 01/24/2018

491 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team S18-G1, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S18-G1, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S18G1                     


                                            4 Members                     


                                            7 Guides authored