Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
2
- Screen
- 2 steps
- Front-Facing Camera
- 4 steps
Flags
0
BackGoogle Pixel Slate
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Orient the Google Pixel Slate so that the screen is facing upwards.
- Use the iFixit opening tool to separate screen from main body.
- Use the suction cup to remove the screen from the body of the device.
Orient the Google Pixel Slate so that the screen is facing upwards.
Use the iFixit opening tool to separate screen from main body.
Use the suction cup to remove the screen from the body of the device.
1024
Step 2
- Gently disconnect the three flat-wires from the screen.
- Carefully separate and remove the screen from the body of the device.
Gently disconnect the three flat-wires from the screen.
Carefully separate and remove the screen from the body of the device.
Step 3
Front-Facing Camera
- Once removed, place the screen face down.
- Peel back the black, adhesive strip covering the front camera so that the silver plate is exposed.
Once removed, place the screen face down.
Peel back the black, adhesive strip covering the front camera so that the silver plate is exposed.
Step 4
- Hold back the adhesive tape to expose the two black 2mm screws that are holding down the cover plate.
- Use the T2 Torx screwdriver to remove the two 2mm screws.
Hold back the adhesive tape to expose the two black 2mm screws that are holding down the cover plate.
Use the T2 Torx screwdriver to remove the two 2mm screws.
Step 5
- Once the two 2mm screws are removed, lift and remove the cover plate.
Once the two 2mm screws are removed, lift and remove the cover plate.
Step 6
- Pull upwards on the flat wire to remove the front-facing camera from the device.
- The camera may be secured to the screen body with adhesive tape. Apply gentle force to remove the camera by removing the tape.
Pull upwards on the flat wire to remove the front-facing camera from the device.
The camera may be secured to the screen body with adhesive tape. Apply gentle force to remove the camera by removing the tape.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Spencer Alonge
Member since: 04/18/2019
630 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S2-G5, Maness Spring 2019
Member of Cal Poly, Team S2-G5, Maness Spring 2019
CPSU-MANESS-S19S2G5
4 Members
5 Guides authored
