Difficulty
Easy
Steps
12
Time Required
5 minutes
Sections
2
- Back Panel
- 4 steps
- Speaker
- 8 steps
Flags
0
BackGoogle Chromebook Pixel 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.
- Flip your device over so the bottom panel is facing up.
Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.
Flip your device over so the bottom panel is facing up.
1024
Step 2
- Peel off the black rubber strips from top and bottom of the back panel.
Peel off the black rubber strips from top and bottom of the back panel.
Step 3
- Remove the fifteen 3 mm Phillips #00 screws from the back panel.
Remove the fifteen 3 mm Phillips #00 screws from the back panel.
Step 4
- Carefully lift the back panel off of the device.
Carefully lift the back panel off of the device.
Step 5
Speaker
- Remove the three red 4.5 mm Phillips #00 screws from the speaker on the right sight of the motherboard.
Remove the three red 4.5 mm Phillips #00 screws from the speaker on the right sight of the motherboard.
Step 6
- Using the plastic opening tool disconnect the speaker wires from the motherboard,
Using the plastic opening tool disconnect the speaker wires from the motherboard,
Step 7
- Carefully remove right speaker from the device.
Carefully remove right speaker from the device.
Step 8
- Using the plastic opening tool, pop out the connector that joins the headphone jack port on the left side to the motherboard.
Using the plastic opening tool, pop out the connector that joins the headphone jack port on the left side to the motherboard.
Step 9
- Remove the red 4.5 mm Phillips #00 screw from the top of the headphone jack port.
Remove the red 4.5 mm Phillips #00 screw from the top of the headphone jack port.
Step 10
- Gently remove the headphone jack port.
Gently remove the headphone jack port.
Step 11
- Remove the three red 4.5 mm Phillips #00 screws from the speaker.
Remove the three red 4.5 mm Phillips #00 screws from the speaker.
Step 12
- Remove the left speaker.
Remove the left speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Garrett Monteiro
Member since: 04/26/2017
389 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
Cal Poly, Team S22-G6, Livingston Spring 2017
Member of Cal Poly, Team S22-G6, Livingston Spring 2017
CPSU-LIVINGSTON-S17S22G6
4 Members
3 Guides authored
