Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Solid State Drive
- 3 steps
Flags
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
BackGigabyte P34G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Make sure you are grounded before starting. To ground yourself, simply touch a metal object that is in contact with the floor for a few seconds.
What you need
Step 1
Solid State Drive
- Remove all 15 marked screws on the underside of the laptop using a #0 screwdriver.
- There are three different sized screws.
- x1 9.8mm Screw
- x8 5.6mm Screws
- x6 5.0mm Screws
- Divide the screws by size and save them in a safe space for reassembly later.
Remove all 15 marked screws on the underside of the laptop using a #0 screwdriver.
There are three different sized screws.
x1 9.8mm Screw
x8 5.6mm Screws
x6 5.0mm Screws
Divide the screws by size and save them in a safe space for reassembly later.
1024
Step 2
- Unscrew the marked 4.5mm screw with a #0 screwdriver.
- Set the screw aside to use for reassembly after replacing the solid state drive.
Unscrew the marked 4.5mm screw with a #0 screwdriver.
Set the screw aside to use for reassembly after replacing the solid state drive.
Step 3
- Carefully pull the solid state drive in the direction shown to disconnect it from the port.
Carefully pull the solid state drive in the direction shown to disconnect it from the port.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
yeunghayden
Member since: 05/01/2015
823 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 8-1, Regan Spring 2015
Member of Cal Poly, Team 8-1, Regan Spring 2015
CPSU-REGAN-S15S8G1
5 Members
12 Guides authored