Difficulty
Easy
Steps
5
Time Required
10 - 30 minutes
Sections
1
- Chainring
- 5 steps
Flags
0
BackBicycles
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Chainring
- Push the chain tensioner towards the front of the bicycle to release the tension on the chain.
- Unroute the chain from the chainrings.
Push the chain tensioner towards the front of the bicycle to release the tension on the chain.
Unroute the chain from the chainrings.
1024
Step 2
- Remove the 8 mm Hex screw from the crank arm.
Remove the 8 mm Hex screw from the crank arm.
Step 3
- Remove the crank arm and chainrings by pulling the crank arm away from the bicycle frame.
Remove the crank arm and chainrings by pulling the crank arm away from the bicycle frame.
Step 4
- Remove the four 5 mm Hex screws that mount the crank arm to the chainrings.
Remove the four 5 mm Hex screws that mount the crank arm to the chainrings.
Step 5
- Rotate the largest chainring 45 degrees in either direction.
- Remove the crank arm from the chainrings.
Rotate the largest chainring 45 degrees in either direction.
Remove the crank arm from the chainrings.
Reassemble your bicycle with the new chainrings by following these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Ben Frisbie
Member since: 03/22/2016
209 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Michigan Tech, Team 1-7, Lauer Spring 2016
Member of Michigan Tech, Team 1-7, Lauer Spring 2016
MTU-LAUER-S16S1G7
1 Member
1 Guide authored
